C
ClearView News

Which is better rx7 or rx8?

Author

William Cox

Published Feb 23, 2026

Which is better rx7 or rx8?

Mazda RX8 accomplishes the highest speed of 230-240 kmph in no time. The top speed makes this an ultimate sports car and sedan at one fell swoop. The RX7 reaches a top speed of 190-200 kmph.

Consequently, which rx7 is the best?

I find the 3rd gen (1992-2002) to be the most beautiful and the best performing. And like any car, the last year of a model will have almost all the bugs taken care of. Many like the 1st gen (78–85) because of their simplicity and agility.

Likewise, is the rx7 a good car? They are amazing value still, and the engine is unlike any other. The FD is one of the ultimate driver's cars ever built, 50/50 weight distribution, light, turbine smooth engine and flickability. Yes. But you don't buy an RX7 for a “reliable car,” there are much easier, more robust options available.

Similarly one may ask, why is the rx8 hated?

People hate it because they know deep inside their heart that the 8 looks better than their piece of ****.

Which rotary engine is the best?

The most powerful rotary equipped vehicle ever offered from the factory was the Mazda Eunos Cosmo. This was the flagship for Mazda's short lived Eunos luxury brand and could be had with a choice of rotaries. The base engine was the same twin-turbocharged 13B two rotor motor found in the RX-7.

Why are rx7 so expensive?

Over time RX7s have been destroyed in accidents, died from neglect, or become uneconomical to repair and been sent to the scrap heap. Basic laws of supply and demand therefore dictate that the RX7 will become increasingly more expensive over time (provided the bottom does not fall out of the classic car market).
It's just not legal. States don't verify NHTSA regulations to hand out license plates. In most cases if you can get it into the country, you can get plates for it (which is different if you try it with a car for which a model was never sold in the US like a Skyline). Again, that doesn't make it "legal".
The Awesome Community.
The RX7 community is close-knit, for a few reasons: Their cars are unique and don't share many mechanical or body components with any other car, and the low production number of cars make it impossible to have a large community of owners.

How fast is a Mazda rx7?

The 1,146 cc (1.1 L) 12A engine was rated at 101 PS (74 kW; 100 hp) at 6,000 rpm, allowing the car to reach speeds of over 190 km/h (120 mph).

Is Mazda a Japanese car?

Mazda Motor Corporation (Japanese: ???????, Hepburn: Matsuda Kabushiki-gaisha), commonly referred to as simply Mazda, is a Japanese multinational automaker based in Fuchū, Aki District, Hiroshima Prefecture, Japan. In 2015, Mazda was the fifteenth biggest automaker by production worldwide.

How much was an rx7 new?

Mazda RX-7 Models Price and Specs
Starting at $8,360 and going to $11,770 for the latest year the model was manufactured.

What car does Han drive in Tokyo drift?

Mazda RX-7 FD

How much is a VeilSide rx7 body kit?

VeilSide produces a bodykit called "Fortune" which replaces all body panels except the roof. It is currently available for the Mazda RX-7 FD3S, Toyota Supra Mark IV, Acura NSX, Toyota MR-S, and the Nissan Skyline V35/V36. The Fortune kit ranges from $4,500 USD for the MRS to $15,000 for the RX-7.

Why do rx8 engines fail?

The problem is that there are so many different ways for an engine to fail: Excessive carbon buildup accelerates seal wear, causing compression loss (particularly a problem in automatic RX-8s) Excessive carbon buildup unseats the seals, causing compression loss (particularly a problem in automatic RX-8s)

Is the rx8 really that bad?

The Rx-8 has a bad reputation. If you are planning to rebuild the engine right away, you'll definitely have some worry free miles. Remember to keep the engine full of oil. I don't drive mine all the time but it's been reliable.

How long do Mazda rx8 engines last?

They last exactly 2 years, 3 months, 4 days, 6hours, 37 mintues, and 16 seconds. But it is spectacular when they go. Like a fireworks show. But my last one lasted over 225,000 with 0 problems, and it was an auto-x car.

Are rotary engines bad?

Unlike Piston engines, Rotaries are almost immune to catastrophic failure. In a piston motor, you can have a piston seize and cause all kinds of damage, but in a Rotary motor, while the engine will lose power, it will continue to produce a limited amount of power until it finally dies.

Are Mazda rx8 engines reliable?

Yes they're super reliable. IF and only then, they're fabulous engines and great cars. Make sure you do a compression test before buying your rx8, and if its below 7 you're good, but will need a rebuild soon.

Is the 2006 Mazda RX 8 a good car?

2006 Mazda RX-8 Review. Low starting price, athletic handling with a comfortable ride, rotary engine's smooth and high-winding nature, can seat four adults. Most optional features buried in packages, rotary's poor fuel economy and mediocre torque output, some quirky interior ergonomics.

How much is a rx8?

The 2011 Mazda RX-8 Sport with either the manual transmission or six-speed automatic has a Manufacturer's Suggested Retail Price (MSRP) of around $27,500. A loaded Grand Touring with automatic tops out in the $35,000 range.

Is a 2005 Mazda rx8 reliable?

60,000 miles and completely reliable. A blast to drive and it seats 4 adults. There are a few quarks to the care and feeding of the RX8, like never shut it down cold and drive it like you stole it. Follow these simple important guidelines and the car is as trouble free as any I've owned.

Are rx7 hard to maintain?

They are one of the best handling cars of all time. Use it wisely. Again this is a reliability issue, I've been told that problems with the RX7 are common and expensive to fix. No, expensive to upgrade yes, expense to maintain; no its no Honda, but regular maintenance goes a long way.

Can you daily an rx7?

Yes, probably. You can drive almost anything on a daily basis, it's just that some aren't as easy to drive, comfortable, or expendable enough to make it easy. The RX-7 would probably be fine.

What should I look for when buying a rotary engine?

Used Rx8 Buying Guide & Checklist | Mazda Rx8 Buying Tips

How many rx7 generations are there?

There were three generations of the RX-7 which were produced from 1978 until 2002, with over 810,000 cars being built in that time. It has become one of the most iconic cars of all time and made Car and Driver magazine's Ten Best list five times.

Do they still make Mazda rx7?

Modern Mazda RX-7 is officially dead. Mazda RX-7 SA and FB was produced between 1978 and 1985. Mazda RX-7 FD was produced between 1991 and 2002. Mazda RX-7 FC was produced between 1986 and 1991.

What was the last year of the Mazda rx7?

Unfortunately, an escalating MSRP and weak economy spelled the third-generation RX-7's demise after just three years in the U.S. , with 1995 being the final model year. The FD RX-7 soldiered on until 2002 in Japan.

Is the rotary engine an internal combustion engine?

A rotary engine is an internal combustion engine, like the engine in your car, but it works in a completely different way than the conventional piston engine. In a piston engine, the same volume of space (the cylinder) alternately does four different jobs -- intake, compression, combustion and exhaust.

Why are rotary engines unreliable?

Rotary engines have a low thermal efficiency as a result of a long combustion chamber and unburnt fuel making it to the exhaust. They also have problems with rotor sealing as a result of uneven temperatures in the combustion chamber since combustion only occurs in one portion of the engine.

How long do rotary engines last?

Those apex seals don't tend to last long before they need replacing, either. Rebuilding a Wankel at 80,000-100,000 miles is typical, and earlier than most piston engine need such exhaustive work.

How much HP can a rotary engine make?

For it's size, the rotary packs a punch. For reference, the 13B from the RX8 is a 1.3 liter, and produces 232 horsepower. That equates to a ridiculous 178 horsepower per liter. In Theory, that would be equivalent to a 6.0 liter LS2 (from the Corvette) producing 1068 horsepower N/A from the factory.

Are rotary engines worth it?

There are some advantages to rotary engines. As mentioned above, rotary engines create more power (albeit at lower torque) than equivalent piston powered engines. They also are more reliable in the short term. With fewer moving parts, there is simply less to break.

Does anyone still make a rotary engine?

SPIN: MAZDA'S ROTARY ENGINE MAKES A 180-DEGREE TURN
Mazda last built a car powered by a rotary engine in 2012, the RX-8, but had to abandon it largely to poor fuel efficiency and emissions. It has continued to work on the technology, however, as it is one of the company's signature features.

Are there any cars with rotary engines?

No one would argue that Mazda's RX-7 and RX-8 were the most famous roqad-going cars built with rotary engines. There was also the stunningly gorgeous Mazda 787B, which is the only rotary-powered car ever to win Le Mans. But there were a good handful of other cars that used the rotary design.

Why did Mazda stop using rotary engines?

Mazda last built a production street car powered by a rotary engine in 2012, the RX-8, but had to abandon it largely to poor fuel efficiency and emissions. It has continued to work on the technology, however, as it is one of the company's signature features.

Is Mazda still owned by Ford?

Mazda Ownership
Today, Mazda is a wholly owned Japanese company, but at one point, Ford one-third of Mazda. Ford has since sold its shares in the company, and various Japanese stakeholders. Currently, Mazda is headquartered in Hiroshima, Japan and is led by Akira Marumoto, President and CEO since June 2018.

How much HP can a 13b handle?

The internals of the 13B-REW are strong enough to endure 700 horsepower, so tuning focuses predominantly on the maintenance of very specific tolerances, fluid pressures and viscosity, and air-to-fuel mixture.

Continue Reading

How do you super cool water?

Are there oil wells in Wyoming?

How did RXBar get started?

Which is better rx7 or rx8?