C
ClearView News

What is Farecla G3 used for?

Author

Emily Carr

Published Feb 22, 2026

What is Farecla G3 used for?

G3 Regular Grade Paste is a rubbing compound recommended for use on OEM and refinish paint systems to reliably cut P1500 or finer sanding marks. This versatile product can be used by hand or machine, to deliver permanent results – no fillers.

Also know, how do you use Farecla G3 regular grade?

➢ Apply G3 to the surface using a clean damp cotton cloth and then rub over the area using firm backwards and forwards movements. The direction of these movements should be changed regularly to ensure a smooth and even coverage of the area.

Beside above, how does G3 Scratch Remover work? Like T-Cut, Farecla G3 Pro scratch remover liquid is a cutting compound - meaning it restores paint finishes by stripping the topcoat of paintwork, removing light scratches and abrasions.

Correspondingly, what is the difference between Farecla G3 and G10?

G3 is a rough cutting compund to take out deep scratches, and also used after flatting a car down after resray. G10 used then to take out scratches left by the g3 compound and restore the shine. Depends on how good your paint is which one you use but I would say if you use G3 u really need to use G10 after.

Can you use g3 by hand?

G3 Regular Grade Paste is a rubbing compound recommended for use on OEM and refinish paint systems to reliably cut P1500 or finer sanding marks. This versatile product can be used by hand or machine, to deliver permanent results – no fillers.

How do you use cutting paste?

How to use it: Removing scratches
  1. Wash the car thoroughly to remove dirt and grit, then dry it.
  2. Apply a small amount of cutting compound to your applicator and rub into the required area.
  3. Use circular or backwards and forwards motions and keep a steady, light pressure.

What is G3 for cars?

G3 Scratch Remover is manufactured by Farécla, to remove scratches from automotive bodywork. It is available in two forms; a paste and a liquid, allowing you to choose a type to suit you.

What is paste compound?

Stage 1: Cut

Farecla G3 Regular Grade Paste Compound is a one-step system for general use that provides a fast cutting action to permanently remove P1500 or finer abrasive paper marks provide a smear-free, high gloss finish.

Is G3 a cutting compound?

G3 Advanced Liquid Compound is a one-step system that provides a fast cutting action and a high gloss finish. It combines all the reliability and other advantages of G3 Paste with a reduced clean up time when compounding by machine.

What grit is G3?

The G3 is quite a coarse cutting compound, designed to remove scratches from paintwork, or sanding dullness left from 1500/2000 grit flatting papers.

What is Farecla G10 used for?

G10 Finishing Compound is ideal for removing light scratches or swirl marks, especially on darker colours. It will also restore older paint work and bring the true colour back.

What is a g6 finish?

Permanent Finish Removes P1500 abrasive marks quickly and easily with no fillers. Silicone Free Can be used in body shops and applied nearby to where paints are used. High Gloss System Can be used with G10 Finishing Compound for an enhanced gloss finish.

Is G3 better than T cut?

"T" Cut is pretty old hat nowadays as Farecla range of cutting compounds G3 G6 G10 etc are easier and have a better end results. When using Farecla compounds its always wise to read which ones are more suited to machine use or hand use, most can be used with either like G3 but when used by hand it is harder work.

Does G3 remove scratches?

G3 Pro Scratch Remover Paste is a permanent solution for removing minor scratches that do not stop your fingernail when run over the surface of your vehicle. The appearance of deeper scratches will be diminished. G3 Pro Scratch Remover Paste is thick and easy to control, making it ideal for small areas.

What is the best scratch remover for cars?

Best Scratch Removers
  • Best Compound Car Scratch Remover: Meguiar's G17216 Ultimate Compound.
  • Best Ultra-Fine Car Scratch Remover: Barret-Jackson Car Scratch Remover with Polishing Compound.
  • Best Dual-Purpose Car Scratch Remover: Turtle Wax 50734 Complete Compound.

Does G3 work on glass?

G3 Pro Glass Cleaner is a powerful, high performance cleaner that cuts through dirt, grime and road film without leaving smears, streaks or rainbows when using window wipers. It is designed to provide excellent clarity.

How do you use the LG G3 color restorer?

Further Details
  1. Make sure panels are clean and cool.
  2. Apply a small amount of the G3 Pro Colour Restorer to the applicator.
  3. Use a straight back and forth motion – left to right, then up and down.
  4. Apply even pressure and repeat until a desired finish is achieved.
  5. Remove residue with a soft, clean, dry cloth.

How do you use scratch remover?

You can save money over taking your car to a professional by applying these simple steps.
  1. Step 1 - Wash Car. Park car in a shaded area.
  2. Step 2 - Dry The Car.
  3. Step 3 - Prepare Buffer and Pad.
  4. Step 4 - Apply Compound.
  5. Step 5 - Buff the Area.
  6. Step 6 - Wipe Area.
  7. Step 7 - Buff Entire Car.
  8. Step 8 - Apply Wax to Car.

Continue Reading

Does FUE hair transplant really work?

How do you get from Sydney to Daydream Island?

Where can I buy Eaton Centre gift cards?

What is Farecla G3 used for?