C
ClearView News

How long should Sky Box take to initialise?

Author

Jessica Burns

Published Mar 08, 2026

How long should Sky Box take to initialise?

Plug in and switch your Sky box back on at the mains. Check the power light has returned. Wait at least 4 minutes and press Sky to switch on your Sky box.

People also ask, what does it mean when your Sky box is still initialising?

"Your Sky box is still initialising" You may see 'Your box is still initialising, please return in a short time to use this feature' if you've turned your Sky box on. This means that the TV Guide and Planner are updating. If your Sky box has frozen on this message follow the step-by-step instructions below.

Beside above, how long does a Sky rebuild take? It may be a good idea to be aware of a few things before you perform the Planner Rebuild. First the task will take between 10-20 minutes, during which time you will not be able to watch anything on the STB (live or recorded) or make any recordings.

Similarly, you may ask, why is my Sky box frozen?

If the light doesn't turn green, you'll need to restart your Sky box. Press the standby button on your Sky remote, then turn your box off at the mains. Wait a few moments and turn the box back on. Wait four minutes, then press sky on your Sky remote.

Why is Sky box so slow?

Check for ventilation issues. Make sure your Sky box is well ventilated and it's not: placed on a carpet, soft surface or in an enclosed space, such such as a closed cabinet (allow at least 10cm of space above and on all sides of the Sky box). stacked with other devices on top of, underneath, or beside your Sky box.

Where is the reset button on Sky HD box?

Carry out a System Reset
  1. Turn your box off at the mains, then press and hold the left and right arrow buttons on your box.
  2. While still holding the buttons, switch your box on at the mains.
  3. The box will take a few minutes to complete the System Reset and will then switch to standby.

How long should a Sky HD box last?

The main draw of Sky's TV boxes is that you can use them to pause, rewind, and record live TV - 185 hours of standard definition telly (or 60 hours of HD) on the regular Sky+ HD box, or a massive 1180 hours (350 hours of HD) on a 2TB one.

Is it initialize or initialise?

1 Answer. Theoretically, there should be separate spellings depending on your system's locale settings. If it's set to Australia, you should get "initialise", while you should get "initialize" if your system is set to the United States.

How do I fix no satellite signal being received?

“No Satellite Signal†– What to do

You need to either remove the power cord or turn off the power at the wall, wait ten seconds and then turn it on again. The box can take up to two minutes to fully initialise again so don't keep trying to turn it on repeatedly during this time, you may extend the restart process.

Why is my Sky HD box not working?

Firstly, try resetting your sky box with a simple reboot. To do this switch off the Sky Box directly from the mains and do this for all connected devices (this may include your internet router). If the reboot was successful the light on your Sky Box will be green and the Sky Welcome channel will appear on screen.

How do I reset the time on my Sky box?

On the Sky remote, press Services>Options>Sky+Setup for adding extra minutes at the beginning and end of the recordings, or set to 'Automatic'. Remember to press green to save changes to the settings.

What do you do when your Sky box is stuck on standby?

Sky+HD box Stuck in Standby
  1. Put your Sky+ box on standby, then turn the power off.
  2. Press the back up button on the top of your Sky+HD box.
  3. Continue to hold down the back up button and turn the power back on to your Sky box.

How do I force a Sky HD box to update?

Updating Your Sky+HD Box
  1. Press the standby button using your remote.
  2. Switch off the Sky+HD Box and disconnect it from the power supply. Also, turn off the other devices connected to the box.
  3. On the top panel of the box, press and hold the backup button.
  4. Keep pressing the backup button until the box resets.

Why do I have to keep resetting my Sky box?

Try a Reset Settings in the hidden menu. To enter hidden menu press Home and navigate down to Settings but do not select Settings. With Settings highlighted press 0 0 1 Select. Only Carry out the first Reset (Reset Settings) as the other two will wipe all recordings.

Why are some Sky channels not working?

Most likely causes are either that your satellite dish is slightly misaligned or the LNB, which is the bit that the cables connect to has become faulty. If you call Sky and arrange a callout, they'll check your setup from top to bottom and put it right.

What are the lights on my Sky HD box?

The standby light on the front panel is red when your Sky±HD box is plugged into the mains but turned off. The light is green when your Sky±HD box is on. The light is amber when your Sky±HD box is in standby. To save power and money, please put your Sky±HD box into standby mode when you're not using it.

Can you still use your Sky box to record without subscription?

Re: Cancelling sky subscription and keeping equipment

If you cancel your Sky subscription then you can keep the box as you own a Sky+ box and it will continue to receive the free channels but you will be unable to record them or watch any recordings back you might have made.

How long do deleted programs stay on Sky?

Re: Permanent deletion of recordings

After a recording has been in the deleted area for 60 days it automatically deletes.

What does a Sky Plus rebuild do?

Rebuild the programme guide

Is your Sky+ refusing to record programmes? The process will take a few minutes and your Sky+ box will reboot. You will need to give it a couple of minutes after it has rebooted for it to become responsive again, by pressing the Sky button on the remote.

Will Sky planner rebuild delete recordings?

Please Note: rebuilding the planner will stop recordings currently in progress but saved programmes will not be deleted.

Do Sky still do HD boxes?

TIL that Sky are no longer supplying Sky plus boxes, which means thay will only supply the new 'Sky Q' boxes.

Do I need to reset my Sky box every day?

Wait until the router is completely back up and running and then reboot the main Q box.To reboot press Standby on your Sky Q remote (if the box responds to the remote), and then switch off and unplug at the mains. Wait at least 30 secs and then Plug back in and switch your Sky Q box back on at the mains.

How do I clear disk space on my Sky box?

If your Sky Q box is bursting at the seams it's easy to clear some space for your next box set binge. Grab your Sky Q remote and head to the Recordings menu, then scroll to the show or movie that you don't want anymore, tap on the content - then swipe right and click the delete button.

Why is my Sky Q mini box so slow?

Keep the box free of clutter. So no stacking your TV devices on top of each other. This helps avoid overheating your device and also avoids signal disruption. Signal disruption can also be a contributing factor to a sluggish Sky Q box.

Does Sky have live chat?

Live Chat. Login to your My Account and chat to us.

Why is my Sky download speed so slow?

The cause of the issue could be your wireless connection and not the Sky broadband internet connection. You could rule out the Wifi network network being the cause of the problem by connecting your computer directly into the Sky broadband router using a network cable and run the Sky speedtest again.

How do I access Sky Q engineer menu?

Scroll down to 'Settings'. When you arrive at 'Settings' please do not press the enter/select button. Enter the sequence 001 and press the enter/select button. You will now enter the engineering menu.

How do I contact sky?

Call 0333 7591 018

Calls to Sky contact centres are inclusive for Sky Mobile and Sky Talk customers. If you're not with Sky Mobile or Sky Talk, calls to 03 numbers cost the same as calls to 01 or 02 numbers and are included in your calls package.

What do you get with Sky Q box?

The basic-level Sky Q package is called Sky Q Entertainment and includes all the basic channels you can get also get through your aerial: BBC One, BBC Two, BBC Four, ITV, ITV2, ITV3, ITV4, Channel 4 and Channel 5. You also get catch-up options for all those channels, plus extras like 5 USA and E4.

How do I pair my Sky Q Remote?

To set up your Sky Q remote to control the volume, power and input source on your new TV press Home, select Settings, then Setup, then Remote control. Select your Sky Q remote and follow the on screen instructions. Your TV should then be ready to use.