C
ClearView News

How do I turn up the volume on my Soundcore Liberty air?

Author

Emily Carr

Published Mar 15, 2026

How do I turn up the volume on my Soundcore Liberty air?

Unfortunately, no volume controls. Only start, stop, skip, answer call, drop call. With the app from soundcore you can now configure the controls on the earbuds to increase or decrease the volume on your device. Just like the others said, you can't control the volume.

Besides, how do I turn up my Soundcore on Liberty air?

Open the charging case, the earbuds will automatically power on. Place the earbuds back into the charging case and close the case, the earbuds will automatically power off. To manually power on, tap and hold the touchpad on either one of earbuds for 2 seconds until the LED indicator flashes white once.

Furthermore, do wireless earbuds have volume control? The microphones are built into the earbuds themselves, as are any track and volume controls, since no cable is available to support a traditional in-line remote. True wireless earbuds have become increasingly popular because of how light and unobtrusive they feel.

Similarly, you may ask, how do I turn up the volume on my earbuds?

Just tap on the Settings app on your phone and scroll down to the Sound and vibration section. Tapping on that option will bring up more options, including a Volume selection. Then you'll see several sliders to control volume for many aspects of your phone.

Is Soundcore a good brand?

4.0 out of 5 stars Excellent customer support alongwith very good quality product. The quality of the products offered by Anker is excellent and this one is no different. Build quality is good, sound quality is at par with the likes of Jbl, Harman, etc.

How do I use Soundcore Liberty air?

How to Use:
  1. Tap the right earbud twice to pause or play music.
  2. Tap and hold the right earbud to play the next song, or do the same on the left earbud to play the previous song.
  3. Tap the right earbud twice to answer or end a call.

Do Bluetooth headphones have volume control?

Bluetooth headphones take away the confusion of in-line control because their volume controls work with all devices.

Why wont my Soundcore earbuds connect?

Place both earphones back in the charging case and close it, then take them both out and try again. If this doesn't fix the problem try resetting the headphones as below: 1. Delete the "Soundcore Liberty Air " in the Bluetooth list of the device you're connecting to, then turn off your device's Bluetooth.

How do I pair my Soundcore speaker?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Select the “Anker SoundCore” device from the list. Has the pairing been successful, the speaker's LED will stay solid blue.

Are Soundcore earbuds good?

The good The affordable Anker Soundcore Liberty Air 2 improve on their predecessor in several ways, including top-notch performance for making calls, boosted battery life, USB-C and wireless charging and nicer matte finish on the buds and compact charging case. They're water-resistant and should fit most ears well.

How do I reset my Soundcore Liberty air?

Tap and hold the multifunction touchpad of the earbud (currently in the charging case)for 7 seconds until the LED indicator flashed 3 times. This clears the paring information. Step 4. Put the other earbud in the charging case and repeat Step 3.

How do I reset my Soundcore flare speaker?

You should be able to perform a soft reset by pressing and holding the power button for 4 seconds when in a powered off state. A hard reset can be completed by pressing the power button and bass up button (so I've read)…

How do I make my volume louder?

A more advanced method of increasing the volume of your Android device involves adjusting the equalizer settings.
  1. Open the Settings app on your Android device.
  2. Tap on "Sounds and vibration."
  3. Tap on "Advanced sound settings."
  4. Tap on "Sound quality and effects."

How do I make Earpods louder?

Here is how to make headphones sounds better on Android: Go to and select settings.

3.Adjust Volume Settings on Your Device

  1. Go to Settings, then to music.
  2. Scroll down to the bottom and select playback.
  3. Select volume limit and increase the device audio.

Why is the volume on my Bluetooth headphones so low?

Due to some phone's operating systems, you may find your volume is too low. For Android devices, this is most commonly resolved by disabling Bluetooth Absolute Volume, within your phone's settings. For some devices, this may be found in the Developer Options for your phone.

Why is the volume on my headphones so low?

Improperly plugged headphones (top) & Properly plugged headphones (bottom). It's important that your headphone jack is clean. Any dirt, grime, or pocket lint can stick to the headphone jack which can cause interference with the audio signal, thus warping the sound or making it sound too quiet.

How do I turn up the volume on my iPhone earbuds?

How to make your iPhone headphones louder by adjusting the Volume Limit
  1. Open your iPhone's Settings app.
  2. Scroll or search for "Music."
  3. Under the "Playback" category select "Volume Limit." The Music settings allow you to control various aspects of headphones audio.
  4. Turn Volume Limit off, or raise the set limit.

How do I adjust the volume on my TWS earbuds?

Step 1: Make sure the i12 TWS is properly connected to your phone. Step 2: Make sure your phone is not on silent mode. Step 3: Click once on the i12 TWS to play the music. Step 4: Double click on the right earbuds to decrease the volume.

How do Anker earbuds connect?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “Anker SoundBuds Sport” device from the list. Has the pairing been successful, the headphone's LED will stay solid blue.

Are Soundcore Liberty Air waterproof?

These headphones are IPX 5 rated, while not completely waterproof they are water resistant and for some people thats enough to get them through their workouts. The headphones feature a 5 hour playback time that can be extended to 20 when used with the case to charge them.

How do I connect Soundcore headphones to my phone?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “SoundCore Spirit” device from the list. Once the pairing has been successful, the headphone's LED will stay solid blue.

How do you connect Soundcore headphones to life note?

Press and hold the button on both earbuds for 3 seconds. The LED indicators will flash red 3 times and then turn white. Enable the Bluetooth on your phone. You can find the device name "Soundcore Life Note " or “Soundcore Life Note-L” on the Bluetooth list.

How do you put Anker Soundcore in pairing mode?

Upon first start, the Anker speaker is automatically set to the pairing mode and the blue LED flashes rapidly. If you have used the speaker before, simply press the Bluetooth button for approx 2 seconds. The speaker is now ready for pairing and can be connected with other Bluetooth enabled devices.