- Step 1: Unplug the speakers. The very first thing to do is to get the amplifier down to it's most basic state.
- Step 2: Unplug the headunit.
- Step 3: Check if your amp is hot.
- Step 4: Check cables, terminals, and fuses.
- Step 5: Check that you have a good ground connection.
Similarly one may ask, what is protection mode on a amplifier?
Amplifier protection mode is essentially just a shutdown state that car amps can go into under a number of different circumstances. The purpose of this shutdown state is that it can prevent serious damage to the amp or other components in the system.
Subsequently, question is, will my amp work without the remote wire? Amplifiers do not have to use the remote off of your deck. You can use any suitable power source. The only thing you want to make sure is that you find a source the turns off with your key otherwise you may end up draining the battery.
Also Know, why does my amp have power but no sound?
This is a sign that the amp is being overtaxed by a subwoofer or other speakers to the point where it simply can't provide enough power. If you find that the amp has plenty of power for the application, then there could be a problem with your speaker wires, the speakers themselves, or the amplifier's ground.
Why does my amp go into protection mode at high volume?
Solution: This can be caused by too low of an impedance from the way the speakers are wired, and sometimes a poor charging system (if the amp goes into protect when the volume is turned up). Otherwise, it's likely that the output transistors failed. That's the most common cause for an amplifier to go into protection.
