How do I connect to eduroam Ohio University?

1. Connect to the WiFi@OSU wireless network.
2. Open a web browser.
3. Attempt to browse to a website, such as
4. Click on Secure Network Access for Students, Faculty and Staff.
5. Follow the on-screen instructions.

1. Press the Menu key and select Settings.
2. Select Wireless & networks or About Device.
3. Select Wi-Fi Settings or Hardware Info.
4. Press the Menu key again and choose Advanced. Your device's wireless adapter's MAC address should be visible here.

1. Connect to your Google Home using bluetooth.
2. Once connected begin the process to connect to Wi-Fi.
3. Pick the room you are setting up the Google Home in.
4. On the screen that says Connect to Wi-Fi, click on the three vertical dots at the top-right corner and click Show MAC address as shown below.

1. On your Android device, go to Settings, then tap Wireless & networks, then Wi-Fi settings.
2. Tap eduroam.
3. Make sure that for EAP method, PEAP is selected.
4. Tap Phase 2 authentication, and then select MSCHAPV2.
5. Enter:
6. Tap Connect.
7. If asked to accept the network-access.it.cornell.edu certificate, click Yes.

1. Make sure your wifi is turned on and open up the wifi networks. Tap on eduroam to connect.
2. Enter your CatID username in the Identity field followed by @uni.edu. Example: . Scroll down to the password field, enter your passphrase, and choose Connect.

1. From your iOS Home screen go to Settings and select Wi-Fi.
2. In the Wi-Fi Networks screen, under Choose a Network, select eduroam.
3. You will be prompted for a username and password.
4. Leave the Mode: Automatic.
5. Accept the certificate prompt in the next window.

1. Click on the Wifi symbol in the bottom right of your screen and select the network option.
2. Choose Join other and select advanced.
3. Enter eduroam in the SSID field and select PEAP from the EAP method drop down menu.
4. Click Connect.

1. Go to wifi settings.
2. Select eduroam at the institution.
3. Enter your username followed by @sheffield.ac.uk.
4. Enter your password.
5. Tap Join or Connect.
6. Accept the security certificate.

1. Find the Ethernet port on the back of your TV.
2. Connect an Ethernet cable from your router to the port on your TV.
3. Select Menu on your TV's remote and then go to Network Settings.
4. Select the option to enable wired internet.
5. Type your Wi-Fi password using your remote's buttons.

Connect to the eduroam Wireless Network for Android Phones

1. Under the Wi-Fi settings, tap from Off to On.
2. Tap eduroam to go to the configuration screen.
3. Select the following parameters and tap Connect.

1. On your Android device, go to Settings, then tap Wireless & networks, then Wi-Fi settings.
2. Tap eduroam.
3. Make sure that for EAP method, PEAP is selected.
4. Tap Phase 2 authentication, and then select MSCHAPV2.
5. Enter:
6. Tap Connect.
7. If asked to accept the network-access.it.cornell.edu certificate, click Yes.

1. The key steps are: Go to Settings (or Control Panel). Select the Networks & Internet (or Network and Sharing Center) option. Find the 'Manage known networks' list. Forget any eduroam network listed.
2. Then follow these steps to re-connect to eduroam.

1. To begin, click on the Settings icon from your home screen.
2. Tap uofm-secure to connect to it.
3. Staff: enter your umnetid and password.
4. You will be prompted to verify the U of M certificate.
5. Important Note on saved passwords.
6. Select Wi-Fi from the left-hand side menu.
7. Click Forget this Network.

1. Click on the AirPort icon on the menu bar at the top of the screen.
2. Select 'eduroam' from the menu and you should get a prompt for your User Name and Password.
3. Enter your fully qualified UWE user name (e.g. ) and your UWE password, then click the OK button.

1. From the Home screen select Settings > General > Wi-Fi.
2. Select the 'i' icon next to the eduroam network. This will display the configuration for the network.
3. At the top of the screen is a Forget this Network button.
4. You can now try connecting to eduroam again.